ETFE PRIMER
ETFE PRIMER
Product Description
Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials. ETFE products are divided into three forms: powder, liquid and particle, which can be processed by spraying, rolling coating, extrusion, injection molding and other processing technologies. Moulding parts includes lining, thin film, tube, wires, etc. and can be widely applied in chemical industry, agriculture, architecture, electronics, automobile and so on.
In order to enhance the adhesion of the ETFE coating to the substrate, Dongyue ETFE primer products with strong adhesion was launched, which simple operation, uniform and stable performance. At present, the primer products are divided into liquid primer ET620YBK and powder ET620PBK. Liquid primer is applied to various working conditions in open spaces that are easy to operate, and powder primer is suitable for working conditions in narrow spaces that are difficult to operate.
Technical Indicators of Liquid Primer ET620YBK
|
Subject |
Unit |
Property |
|
Product Appearance |
--- |
Black Liquid |
|
Solid Content |
% |
≥30 |
|
Viscosity |
mPa*s |
200～600 |
|
Average Particle Size |
μm |
40±10 |
|
Peel Strength Test |
--- |
Excellent |
Technical Indicators of Powder Primer ET620PBK
|
Subject |
Unit |
Property |
|
Product Appearance |
--- |
Black Powder |
|
Average Particle Size |
μm |
40±20 |
|
Thermal Stability |
--- |
Excellent |
|
Peel Strength Test |
--- |
Excellent |
Packaging
1)ETFE liquid primer product , double-layer packaging, inner layer is plastic drum, outer layer is carton, 10KG/carton.
2)ETFE powder primer product, double-layered polyethylene sealed and then packed in carton. 20KG/carton.
Notes
1)When dealing with ETFE powder for deep processing, operators must wear protective cloth and mask to avoid potential safety hazards, such as inhalation of dust and toxic gas, or hurt by high temperature. No open flame and smoking in workplace. Exhaust devices should be installed.
2)Once opened, unused product should be repacked to avoid any dust or contamination.
3) The product should be stored in cool ventilated place and away from fire source and heat source.
4)It should also be prevented against sunlight and moisture, kept in upright position and handled with great care.
5)Primer product , After a long period of time, the effect of shaking before starting is better.
6)Product waste must be handled properly following local laws and regulations.